Some Tips About Maintaining Your Lotion Pumps
With the improvement of people’s living standards, the use of home furnishing products is becoming more and more convenient, including the application of lotion pumps. In daily life, there is almost everywhere the shadow of the applications of lotion pumps, such as beauty products, cleaning products, medical products, and so on. A lotion pump is a liquid distributor which can pump the liquid in the lotion pump bottle and add the outside atmosphere into the bottle by pressing the principle of air pressure. When people use lotion pumps, people may ignore the ways about maintaining lotion pumps, resulting in a shorter service life of lotion pumps. By reading this article, you will learn some tips to maintain your lotion pumps to extend their useful life.
How do lotion pumps work?
Manually press down the pressure handle, the volume in the spring cavity decreases, and the pressure increases. The liquid enters the nozzle cavity through the hole of the valve core and then ejects the liquid outward through the nozzle. At this time, when the pressure handle is released, the pressure-volume in the spring cavity increases, resulting in negative pressure. The ball is opened under the action of negative pressure, and the liquid in the lotion dispenser bottle enters the spring cavity. At this time, there is a certain amount of liquid in the valve body. When the pressure handle is pressed again, the liquid stored in the valve body will rush upward and then spray out through the nozzle.
The tips for maintaining lotion pumps
You need to regularly clean your lotion pump dispenser to prevent clogging so that the lotion pump can not work properly. The methods to clean lotion pumps are very simple. You need to screw the lid off the lotion bottle, then remove the lotion pump assembly, wipe the distribution pipe with a tissue, and then clean the whole assembly. You only need to rinse the lotion pump with warm water and a little vinegar. For that stubborn dirt, you can use more vinegar, and toothpicks may also come in handy.
If your lotion pump head can not be retracted, it means that the lotion pump is locked or the cream pump is jammed. When you use your lotion pump, if you pump your lotion pump head down and rotate 90 degrees, the locking mechanism of many lotion pumps will lock the lotion pumps. In this case, you can unlock the lotion pump by rotating the pump back to its working position.
In addition, another possibility is that the spring in the lotion pump may be broken because the spring is installed in the lotion pump. For this situation, you need to unscrew the reservoir from the cover for inspection and repair. Specifically, first, you need to unscrew the pump reservoir from the nozzle. And then separate the reservoir from the nozzle and remove the spring, and then replace it with the same spring.
If the distributor pipe is too short or twisted, you can consider replacing the distributor pipe at this time. As a general practice, you can pull the distributor pipe out of the reservoir pipe first. Then you need to go to the replacement of the plastic pipe part and reassemble the pump for use.
Therefore, you can use some maintaining methods to let your lotion pump serve you for a longer time. In addition, you can also find high quality lotion pumps to ensure the long time use.
